Psp as wifi modem

Changing the name here may cause issues with your Internet connection on other devices. Enter the password. Wireless passwords are case-sensitive, so make sure to enter the password exactly. Select Easy and press the "Right" arrow. Doing so lets the PSP use the router's default settings. Press the "Right" arrow. This will confirm your network's name. Save your settings.

You will be shown a list of all of your settings. Make sure everything looks correct, then press the "Right" button on the directional pad to continue and press X to save your settings. Select Test Connection and press X.

This will test your PSP's connection to the Internet. If you see "Successful" on the Results page, then your connection was properly configured. Part 2. Find your router's IP address. Enter your router's IP address into the address bar. This will open your router's page, which allows you to make changes to your router settings. Log in with your administrator account if prompted. You will need to enter your username and password to be able to access your router's settings.

If you cannot figure out the login information, you can manually reset the router by pressing and holding the "Reset" button on the back for at least 30 seconds. Open the Wireless section. The exact wording here will vary on different routers. Change your security type.

Find the "Allowed Devices" or "Access List". You may first have to open the Advanced Wireless Settings. Again, the wording may vary. Ensure that MAC address filtering is not turned on. Try connecting your PSP to the Internet. If you still can't get the connection to work, you'll have to take the PSP into a tech department for further evaluation. What should I do?

Yes No. Not Helpful 3 Helpful If you're having trouble connecting, try accessing your router's interface and enabling UPnP. This setting allows the easy addition of external devices. Not Helpful 7 Helpful Ishmam Dhrubo. It's not a problem with your PSP problem. Maybe your router has turned off the main connection to go to proxy.

Not Helpful 9 Helpful 9. An unmarked switch on the side of the PSP needs to be in the "on" position. If it is not, the PSP will not connect to the internet. Check your PSP for the switch and change its position.

Not Helpful 6 Helpful 3. It means your PSP is not fully updated to the current version of the system; update it, and try again. Not Helpful 38 Helpful Try to elevate your router to clear it from obstructions and increase its signal.

If the signal is still too weak, you'll need to either purchase a booster, or use the PSP closer to the router. Not Helpful 13 Helpful 1. If it has a missing switch, you can replace that, it is pretty easy to repair. Not Helpful 3 Helpful 2. Include your email address to get a message when this question is answered. You Might Also Like How to. How to. About This Article. Written by:.

Check your network security configuration. You will need to ensure that your wireless security is configured correctly in order for your PSP to be able to join the network. Open your router configuration page on a computer connected to the network. See this guide for more details. If you have an AirPort router, click here. Navigate to the "Wireless" section. Update your PSP. You will need to be running at least version 2. See this guide for details on updating your PSP without a network connection.

The PSP is currently on version 6. Open the Settings menu. Select "Network Settings". This is located at the bottom of the Settings menu. Select "Infrastructure Mode". This will allow your PSP to connect to a wireless network. Ad-Hoc mode is for connecting directly to another PSP system. Select "[New Connection]". This will create a new connection that will be stored on your PSP, allowing you to automatically connect to the same network in the future. The PSP can store up to ten networks.

Select "Scan". This will scan for any local wireless networks. If you'd rather, you can enter in the name of your network manually. This is useful if your network is not broadcasting its SSID. Select your network. After the scan is complete, a list of available networks will be displayed. Select the one you want to connect to. The signal strength for each network will be displayed in the list.

Enter a name for your connection. By default, the connection will be named the same as your SSID. You can change this to be more recognizable, such as "Home" or "Office". Select your security settings.

If the access point you are connecting to does not have a password, select "None". Enter in your wireless password. After entering in the security type, enter in the password for your wireless connection.

Wireless passwords are case-sensitive, so make sure you enter the password correctly. You can find your wireless password on the same page as your router's security settings. Select "Easy". Most users can select "Easy" without having to worry. You will be asked to enter your IP address manually. Confirm the network name. A box with the network's SSID will be displayed. You can make changes, but most users can leave this as it. Press Right to continue. Review your settings. You will be shown a list of all of your settings.

Make sure everything looks correct, and then press the Right button on the directional pad to continue. Press "X" to save your settings. Test the connection. After saving your settings, you will be given the option to test the connection.

Your PSP will attempt to connect to the internet. In the results screen, check the "Internet Connection" entry. If it says "Successful", then your connection was properly configured. After changing your security settings, you will need to run through the connection setup process again.

Turning your network security off completely should be a last-ditch effort to ensure that your PSP actually works, as it leaves your network undefended. Retry and check your connection.